Notes

Everything captured, linked.

Note	Details
Line 3 runs at 80 % feed rate in the first week after the restart Added by a visitor	28.10.2026
Stahl Nord sends the 3.1 certificate electronically with the delivery note, so goods… Added by a visitor	28.10.2026
Show the auditor the decision log from the knowledge base as evidence for clause 7.1.6…	26.10.2026
Thomas Huber leads the audit; Martina Keller joins the opening and closing meetings	26.10.2026
Lukas Brunner takes over maintenance planning for all lines from 01.12.2026	19.10.2026
Spindle checks on Line 3 happen every month and after every crash, using Nina's five…	19.10.2026
Any delivery that arrives without a 3.1 material certificate goes into quarantine…	07.10.2026
BW-Classic stays available read-only until 31.12.2027 for look-ups	29.09.2026
Move the ERP go-live from 01.12.2026 to 11.01.2027	29.09.2026
The Line 3 retrofit window is 02.11.2026 to 13.11.2026; Line 3 restarts on 16.11.2026	14.09.2026
Keep Acier Léman as a backup supplier for stainless 1.4404 only, with a small yearly…	27.08.2026
Switch our main steel supplier from Acier Léman to Stahl Nord from 01.01.2027	27.08.2026
Clean up the legacy variant BOMs in BW-Classic before the migration instead of migrating…	06.07.2026
Replace the bearings on all four spindles of Line 3 during the retrofit window, not one…	18.05.2026
Fit vibration sensors on all four spindles of Line 3, so bearing wear shows up before a…	20.04.2026
Retrofit Line 3 instead of buying a new machining centre	20.04.2026
Replace BW-Classic with NovaERP, hosted in a Swiss data centre	09.03.2026
Reto Ammann owns the ERP migration; Sandra Meier is the sponsor and signs off the budget…	09.03.2026