SDI Lab Knowledge capture Demo on a made-up company's notes (Bergwerk Präzision AG). Anything added here is visible to other visitors. A pause ends after 5 minutes, so no one can block the demo. Resets every night at 03:30. Capturing

Ask

Answers come from the notes, with the source of every passage.

Answer

No AI model in this demo: these are the best-matching passages from the notes. On a real install, a model writes the answer from these citations.
  1. [1] Spindle checks on Line 3 happen every month and after every crash, using Nina's five steps: warm-up, reference mandrel, runout, vibration, log
    Decided on 19.10.2026 in Knowledge handover: Nina Frei, maintenance.
    Open note
  2. [2] Knowledge handover: Nina Frei, maintenance · Things only Nina knew
    Decision: Lukas Brunner takes over maintenance planning for all lines from 01.12.2026. Decision: Spindle checks on Line 3 happen every month and after every crash, using Nina's five steps: warm-up, reference mandrel, runout, vibration, log. • Action: @Nina Frei record a short video of the calibration with the reference mandrel (due 2026-11-20) • Action: @Lukas Brunner shadow Nina Frei during the bearing swap in the retrofit window (due 2026-11-13) • Action: @Thomas Huber add the monthly spindle check to the maintenance plan (due 2026-11-27)
    Open note
  3. [3] Line 3 retrofit: check-in before the stop Added by a visitor
    • Action: @Nina Frei hand over the sensor alarm thresholds to Lukas Brunner (due 2026-11-13) • Action: @Thomas Huber inspect the first five parts after the restart (due 2026-11-17) • Action: @Lukas Brunner tell Novamed about the lower output in week 47 (due 2026-11-09)
    Open note