SDI Lab Knowledge capture Demo on a made-up company's notes (Bergwerk Präzision AG). Anything added here is visible to other visitors. A pause ends after 5 minutes, so no one can block the demo. Resets every night at 03:30. Capturing

Ask

Answers come from the notes, with the source of every passage.

Answer

No AI model in this demo: these are the best-matching passages from the notes. On a real install, a model writes the answer from these citations.
  1. [1] Knowledge handover: Nina Frei, maintenance
    Nina Frei leaves Bergwerk Präzision AG on 30.11.2026 after 17 years. This session captured what she knows that is not written down anywhere else.
    Open note
  2. [2] Spindle checks on Line 3 happen every month and after every crash, using Nina's five steps: warm-up, reference mandrel, runout, vibration, log
    Decided on 19.10.2026 in Knowledge handover: Nina Frei, maintenance.
    Open note
  3. [3] Lukas Brunner takes over maintenance planning for all lines from 01.12.2026
    Decided on 19.10.2026 in Knowledge handover: Nina Frei, maintenance.
    Open note
  4. [4] Knowledge handover: Nina Frei, maintenance · Things only Nina knew
    • Spindle 4 always reads 0.3 mm/s higher than the others; that is the mounting, not wear. • The Aarmatic service hotline is slow; call their technician Marco Bianchi directly. His number is on page 2 of the maintenance binder. • The coolant filter on Line 3 clogs every 6 weeks in summer. The new filter from the retrofit should fix this.
    Open note
  5. [5] Nina Frei
    Nina Frei is Senior Maintenance Engineer at Bergwerk Präzision AG. Ask Nina about: spindles, calibration, machine vendor contacts.
    Open note