SDI Lab Knowledge capture Demo on a made-up company's notes (Bergwerk Präzision AG). Anything added here is visible to other visitors. A pause ends after 5 minutes, so no one can block the demo. Resets every night at 03:30. Capturing

Ask

Answers come from the notes, with the source of every passage.

Answer

No AI model in this demo: these are the best-matching passages from the notes. On a real install, a model writes the answer from these citations.
  1. [1] Fit vibration sensors on all four spindles of Line 3, so bearing wear shows up before a breakdown
    Decided on 20.04.2026 in Line 3 retrofit: planning meeting. Why: • two of last year's unplanned stops were bearing failures that Nina Frei could hear days before they happened.
    Open note
  2. [2] Line 3 retrofit: planning meeting · Retrofit or replace?
    Decision: Fit vibration sensors on all four spindles of Line 3, so bearing wear shows up before a breakdown. Why: two of last year's unplanned stops were bearing failures that Nina Frei could hear days before they happened.
    Open note
  3. [3] Replace the bearings on all four spindles of Line 3 during the retrofit window, not one by one when they fail
    Decided on 18.05.2026 in TCK-0412: Line 3 spindle 2 vibration and surface marks. Why: • spindles 1, 3 and 4 have the same running hours as spindle 2.
    Open note